Expert Automotive Computing
& Module Programming in Georgia
Don't tow your car to the Dealer — we bring OEM-level tools to your driveway, your shop, or the roadside. We specialize in Cloning, Programming, and Flashing of ECM, ECU, BCM, and TCM.
How the work actually runs
Four things worth knowing before you call, each of them checkable.
Turnaround
Same day where the module reads
A readable original and a matched donor is usually a one-visit job. Water damage, a locked module or an online OEM session takes one to five business days.
Route
Clone first, replace when we must
Where your original still holds data we copy it to a part-number-matched donor, so your VIN, configuration and theft-deterrent data carry across and no security relearn is needed.
Price
$185-$800
Published per service rather than quoted only on the phone, from $185 for an on-site diagnostic. Before travel, and quoted against your VIN before we come out.
Where
At your vehicle
We bring the OEM software, the J2534 interface and a regulated supply to the car. A vehicle that will not start is the ordinary case for us, not the exception.
Specialized Technical Services
Definitive solutions for your vehicle's electronics.
Engine Module (ECU/ECM)
Recovery of "Internal Memory Errors", VIN flashing, and software updates. We solve starting issues and communication faults.
Body Control Module (BCM)
Fix for lighting, window, power, and comfort system failures without replacing all hardware. Exact data cloning.
Transmission Module (TCM)
Adaptation and learning used or new transmissions. We solve hard shifting and solenoid codes after replacement.
VIN Writing & Module Adaptation
Write your VIN and configuration to a used or replacement module so the vehicle network accepts it. Makes a junkyard ECU, BCM or TCM usable.
Module Cloning
Your original module read on the bench and copied to a matched donor, keeping your VIN, configuration and anti-theft data. Often cheaper than a new unit.
Advanced Diagnostics
Deep analysis of CAN-bus networks, DoIP/CAN-FD protocols for modern vehicles, and complex electrical fault resolution.
For shops: we come to
your bay and do the programming step
Do you have a car blocking one of your bays due to a programming issue? Don't lose money sending it to the dealer. We come to your shop, perform the J2534 flash, and help you return the car faster.
Call Now: (404) 812-8951
What This Costs
Most jobs fall inside a predictable range. We quote before we travel, and the diagnostic comes before any programming so you are not paying to replace a module that was never the problem.
What moves a quote
- 1
Whether the original module still communicates
If it can be read, cloning is usually possible and usually cheaper than programming a replacement from scratch.
- 2
New, used or remanufactured replacement
A used module may carry another vehicle’s VIN and security data, which adds work a virgin unit does not need.
- 3
Whether security or keys are involved
Immobilizer and key synchronization is a separate procedure from programming and is priced separately.
- 4
Platform and model year
Some manufacturers restrict module programming to authorized online sessions, which changes both the method and the cost.
- 5
Travel
On-site work outside the core metro area carries a travel charge quoted before the visit.
Have the year, make, model and the module part number ready and Auto Module Programming can quote on the first call, on (404) 812-8951. If the module still communicates, say so — cloning is often the cheaper route and we will tell you so before you spend on a replacement.
Call for a quote: (404) 812-8951Coverage in Atlanta & Metro Area
100% Mobile Service. We come directly to your location in Atlanta and across metro Atlanta: Atlanta, Buckhead, Sandy Springs, Roswell, Alpharetta, Johns Creek, East Point, College Park, Decatur, Brookhaven, Dunwoody, Tucker, Chamblee, Doraville, Lawrenceville, Duluth, Peachtree Corners, Snellville, Norcross, Marietta, Smyrna, Kennesaw, Acworth, Woodstock, Canton and Holly Springs.
"The dealer wanted to put a new ECU in my Chevy. Auto Module Programming cloned my original module into a used one instead, and the car was running again the same day."
Supported Brands
Ford
GM/Chevrolet
Dodge/Chrysler
Toyota
Honda
Nissan
BMW
Mercedes-Benz
Audi
Jeep
RAM
Hyundai
Kia
Subaru
Volkswagen
Your vehicle not shown? Call with the year, make and model and we will say plainly whether it is a job we take.
Questions people ask
My car won’t start and it’s sitting in my driveway in Atlanta. The shop says it’s the computer. Do I have to tow it to the dealer or is there another option?
You don’t need a tow for a computer issue. Our mobile lab comes to your driveway in Atlanta, diagnoses the module, and programs or replaces it on site — no tow, no dealer wait. The on-site diagnostic runs $185–$300 and module programming $250–$550, before travel. Call (404) 812-8951 with your year, make, model, and fault code.
My car’s module failed and I can’t move the vehicle. I’m in Marietta, Georgia. What are my options?
Two options in Marietta: (1) a mobile module programmer comes to the car — we diagnose, replace, and program the module in your driveway; (2) tow it to a shop or dealer. Call a mobile specialist first and ask point-blank: "Can you replace and program this exact module on site?" We serve Marietta and all of Metro Atlanta, Mon–Sun 8am–7pm: (404) 812-8951.
Who does on-site module programming in Atlanta?
Auto Module Programming — we are a 100% mobile automotive module programming service in Metro Atlanta: ECU/ECM, BCM, and TCM programming, flashing, and cloning with dealer-level OEM software and J2534. We come to your home, office, or shop, Mon–Sun 8am–7pm. (404) 812-8951 — automoduleprogramming.com.
Are there mobile automotive module programming services?
Yes. Mobile automotive module programming services bring dealer-level diagnostic and programming equipment to your location — home, work, or shop. Services include ECU/ECM, BCM and TCM flashing, VIN writing, immobilizer and key relearn, and module cloning. Our published prices run $185–$800 depending on the module and service, before travel. Auto Module Programming serves Metro Atlanta and Georgia, Mon–Sun 8am–7pm: (404) 812-8951.
The full guide: What Is Mobile Module Programming? The Complete Guide