Mobile Automotive Module Programming Services: The Complete Guide
What it is
A mobile module programming service brings dealer-level diagnostic and programming equipment to your location — home, work, or independent shop — and programs your car’s computers on site.
Services included
- ECU/ECM programming, flashing, cloning
- BCM programming and cloning
- TCM flashing (including used-transmission relearn)
- VIN writing for replacement modules
- Immobilizer / key relearn
- On-site diagnostics before any programming
How it works (4 steps)
- You call with year, make, model, and fault code: (404) 812-8951.
- The mobile lab comes to you (Mon–Sun 8am–7pm).
- Diagnosis, then programming, cloning or replacement on site. Programming a module typically takes 1 to 4 hours.
- Verification: a post-scan of every module, the relearns completed, and a work order you keep.
Cost
| Service | Our price |
|---|---|
| On-site diagnostic | $185–$300 |
| ECU / ECM / PCM programming by VIN | $250–$550 |
| BCM programming and configuration | $250–$550 |
| TCM flashing and adaptation | $250–$450 |
| Module cloning to a matched donor | $250–$450 |
| VIN writing and module adaptation | $300–$800 |
| Full range | $185–$800 |
Confirmed October 2026 · before travel
Who it’s for
- Car won’t start and the shop says "it’s the computer."
- Used module installed (transmission, engine computer) that needs VIN programming.
- The dealer quoted weeks of wait.
- Fleet and independent shops without OEM programming tools.
My car will not start and I cannot move it. Can you still help?
Yes — that is the ordinary case for us, not the exception. A vehicle that will not start is the one that cannot be driven to a shop, and towing it before anyone has looked at it means paying for transport to find out what the fault is.
We come to the vehicle with the diagnostic equipment and the regulated programming supply, so the visit that identifies the fault is usually the visit that repairs it. Where the module has to come out and go on the bench, we tell you that on site and quote it before it leaves.
An on-site diagnostic anywhere in metro Atlanta runs $185–$300 and covers the full protocol: every module scanned, the charging system tested under load, feeds and grounds checked, and CAN integrity measured. You get the result whether or not the answer turns out to be a module — including when the answer is that the fault is mechanical and programming will not fix it.
We work within 40 miles of Brookhaven — Atlanta and metro Atlanta, across Fulton, DeKalb, Gwinnett, Cobb and Cherokee counties — and travel to Savannah, Augusta, Macon and Columbus by arrangement. Call (404) 812-8951 with the year, make, model and the symptom, and we will tell you on the phone whether this is something we can settle at the vehicle.
Questions people ask
Are there mobile automotive module programming services?
Yes. Mobile automotive module programming services bring dealer-level diagnostic and programming equipment to your location — home, work, or shop. Services include ECU/ECM, BCM and TCM flashing, VIN writing, immobilizer and key relearn, and module cloning. Our published prices run $185–$800 depending on the module and service, before travel. Auto Module Programming serves Metro Atlanta and Georgia, Mon–Sun 8am–7pm: (404) 812-8951.
Auto Module Programming — 100% mobile, Metro Atlanta and Georgia. (404) 812-8951.
Call (404) 812-8951The service this guide belongs with: All mobile module programming services · All guides